Kamui tip tool

[hotpot]

Ye i seen them somewhere else for that amount . Not sure on width but looking at the pic i would guess they are about half the width of a floorboard which is around three inches or there abouts .

[nostawmail]

ive just made myself one of these, it doesnt have the stainless steel file, just a piece of fine grit wet and dry. i attached using double sided sticky tape so it can be removed easily when its no good. i made it a simple design the same as the adam file using a piece of 4mm ply i had lying around, i quickly sanded the edges to the same ahpe as the adam and they work ok perhaps more of a fashion accessory imo.

[hotpot]

I prefer a tip pick myself .

[ADR147]

ive just made myself one of these, it doesnt have the stainless steel file, just a piece of fine grit wet and dry. i attached using double sided sticky tape so it can be removed easily when its no good. i made it a simple design the same as the adam file using a piece of 4mm ply i had lying around, i quickly sanded the edges to the same ahpe as the adam and they work ok perhaps more of a fashion accessory imo.

so not the same thing at all!

[ADR147]

ive just been on a website and those adam files are £25 lol, they look good what are the dimensions of them, would the fit in a standard width case?

ouch! - pretty sure i can do better! - its 70mm by 50mm

[Gerry Armstrong]

But the Kamui one is specially designed for Kamui tips isn't it? It must be true, it says so in the video.

[hotpot]

Exactly the same thing , except the ADAM one from A D is much cheaper .

[Raldon]

See this for example:

http://www.feinewerkzeuge.de/nt-dresser.html

scroll a bit down...

7,80 Euro (80 x 54 mm)

It is not difficult to handicraft your own unique tool with it.

[Acrowot]

Ich sprechen nur einbischen Deutsche.
:snooker: