Suggestions for a 3/4 case with generous storage?

[Dredd46]

Looking for suggestions for a 3/4 wide case or case. Current case has enough room for 3/4 cue plus original screw in extension. I have a push on extension and a mini butt which I carry along with other odds and sods. It would be nice to get it all in one case. Will add a telescopic extension at some stage. Not really after a custom or leather case as such. So long as it has the storage I'm looking for and is hard enough to protect the contents.

[Ramon]

cue craft 3/4 aluminium case
Peradon 3/4 aluminium case
Peradon 3/4 leather case ( abit more expensive ) .

All good and value for the money .

[jrc750]

cue craft 3/4 aluminium case
Peradon 3/4 aluminium case
Peradon 3/4 leather case ( abit more expensive ) .

All good and value for the money .

They won't do the job he's asking for ?

[Ramon]

They won't do the job he's asking for ?

good point.



next time give the guy the right kind of advice and do'nt wake me up , you do'nt need my confirmation .

https://www.woodscues.com/collection...e-with-3-slots
http://www.bennettsdirect.co.uk/Luxu...iple-Colours-1

[jrc750]

I was thinking about these cases
https://www.woodscues.com/collection...-code-cue-case

[Andy Tunaley]

Woods Cues do a 3/4 ABS Platic case with four slots that might do the job for you ... £139 currently

You would need to check dimensions as the suitability will depend on where the cue is jointed.

Also check for the width of the slots as your push on extension will possibly be too wide to fit.

I use a one piece with three slots to carry my cue in with the various extensions and bits like you're looking for.

[mrbluejay]

If you can get a second hand B&W case, they were superb.

[Shockerz]

If you are trying to get a case to include a push on extension I'm not sure there are any unless the other guys know of them as the sleeve is pretty sizable.

[Dredd46]

Tape measure at the ready. Current cue is jointed at 16", shaft is 41". Looks like the push on extension is a push too far. Measures just over 25" in length, sleeve is around 7" in length before it narrows and is just over a inch & a half width wise. Turns out my mini butt is not so mini. Smart extender measuring 10" with the joint. Always thought it was a 6" mini butt for some reason.

[Ninja.cues]

If you are trying to get a case to include a push on extension I'm not sure there are any unless the other guys know of them as the sleeve is pretty sizable.

I agree, you will not get it in a case and friend use to put one in his old Peradon case and it now didn't choose properly..

[Dredd46]

good point.



next time give the guy the right kind of advice and do'nt wake me up , you do'nt need my confirmation .

https://www.woodscues.com/collection...e-with-3-slots
http://www.bennettsdirect.co.uk/Luxu...iple-Colours-1

I'll post quietly next time so as not to wake you Ramon :tongue:

[Dredd46]

I was thinking about these cases
https://www.woodscues.com/collection...-code-cue-case

Mmmm I'm liking that alot, black & red. £139 is about what I paid for my cue many years ago. I don't suppose I'm going to find one cheaper with the extra storage

[Dredd46]

Thanks everyone for the replies. It seems it's time to say goodbye to my old faithful push on extension. That means shopping for telescopic extensions and a mini butt. This snooker malarky is getting expensive

[Ramon]

I'll post quietly next time so as not to wake you Ramon :tongue:

good call . wise choice.

btw, what JRC mentioned is a better choice.

[itsnoteasy]

This any good to you?
http://www.ebay.co.uk/itm/HANDMADE-3...EAAOSw-vlVhszk