Tweet
I Have a question regarding cutting down a tip with a knife to reduce its size , I do this with the blue diamonds i use as they are slightly to high in my opinion uncut , I allways was told that you cut the top off say a couple of mm and leave the base as that is the shoe of the tip and it absorbes all the glue ,, etc . I have also been told that that it is not the way you when reducing a tip should cut the base off and stick the tip on that way as to retain the original shape of the tip . Who is correct ? and who can give me reasons, other than the ones ive stated why .
-
-
stick it on whole, cut it to size width ways and sand it down height ways with course paper then shape with fine paper. -
would take some talent to cut the base off by hand. read my tip guide.Comment
-
-
I wish I had a tip to shape!
Ordered some tips on Ebay paid the seller over 10 days ago
sent two emails asking when they might be sent, but I am being
totally ignored.
What are my options?Comment
-
is the seller me? what sort of tips and how did you pay. most people on ebay pay with paypal and that would cover you.Last edited by ADR147; 11 December 2008, 07:28 PM.Comment
-
You should just glue the tip on, then file it down to the thickness you want. Or cut it down after it is glued--it would be much easier than to do it before it is glued.Comment
-
i think you have to allow 28 days, then you can report the seller and make a claim against him, if you still havent received your goods or heard anything from him.Originally Posted by DG GIBERT View Post"You can shove your snooker up your jacksie 'cos I aint playing no more!" Alex Higgins.Comment
Comment