market research

[rollingegg]

1) 3/4 join
2) ash
3) plain ebony butt
4) 57"
5) 9.5mm
6) 19 Oz
7) 30mm
I am actually thinking of getting my 1st cue recently.

[matt1987]

one piece
ash
ebony butt 4 birds eye maple splices over thick ebony and maple inlays/veneers
57.5"
9.1mm
17oz
29mm

[Mr O]

3/4 jointed at 16"

Ash/Ebony with 4 birdseye maple splices and thin red veneers seperated by 4 thick ebony veneers

57.5"

17.5 oz

9mm tip

balance at around 17"

but dia. 29.5mm

[MikeWooldridge]

mmm, birds eye maple making a late surge...

[Mr O]

Might well want to order that one soon Mr. W

[poolqjunkie]

1 piece
Ash but maple is fine, too, as long as it hits nice
Ebony with some snakewood or burl or pink ivory or bocote or olivewood or zirocote or cocobolo with some light color veneers such as maple. I also want a cue made with a unique piece of spalt maple with some nice dark patches, but not sure how it would go well with other woods, designs...
57"
17.5oz
10mm
17" balance point
29.5mm or a bit more

[samad]

1 piece
Ash but maple is fine, too, as long as it hits nice
Ebony with some snakewood or burl or pink ivory or bocote or olivewood or zirocote or cocobolo with some light color veneers such as maple. I also want a cue made with a unique piece of spalt maple with some nice dark patches, but not sure how it would go well with other woods, designs...
57"
17.5oz
10mm
17" balance point
29.5mm or a bit more

err.... can't really understand your design.... could you send us a pic

[thai_son22]

err.... can't really understand your design.... could you send us a pic

i second that. hes a weirdo

[ChatLag]

1 piece
I also want a cue made with a unique piece of spalt maple with some nice dark patches, but not sure how it would go well with other woods,

Woah, spalted maple is a great idea! I've seen that only on guitars so far but that would be really different as a shaft.

Would be interesting how it is about playablitity.

[25snooker]

1) 1pc
2) maple
3) Mike Wooldridge custom CC-07
4) 55.5"
5) 9.5mm
6) 18oz
7) 29mm

[poolqjunkie]

Just a cue made with splat maple splices, not the shaft.

[samad]

Oh , i thought instead of "or" after each wood you had put "and" , so the wood would have had like 8/9 woods which would make a very complex design so wanted to know what it would have looked like

[Snookered]

Just a cue made with splat maple splices, not the shaft.

Something like this??

[samad]

I thought that was curly maple ??

[FerruleFox]

1) 2pc
2) ash
3) plain ebony butt
4) 59"
5) 9.75mm
6) 18.5oz
7) 28mm diameter