Originally Posted by snookerloopy32
View Post
Announcement
Collapse
No announcement yet.
Mastercraft, Craftsman or something else?
Collapse
X
-
Originally Posted by Bigmeek View PostLawrywild Hello mate. What kind of joint did you get on your cue? I bought a Mastercraft cue last year and it came with a standard joint. (See the attached photo.) Since new, I've had a funny feeling that the joint is a bit suspect. There's been times when I've felt that the joint has worked loose after about half-an-hours play. I've developed a nasty habit of checking the joint after every shot. If you've got the same joint its soemthing to look out for. Thinking of contacting Dave for advice. Maybe he could swap out the joint for a different one.
It's like yours however the spiral bit (is it called a thread? lol i'm useless with terms) is pushed to the bottom, (3 of them) and there is a thick bit with a greater diameter than the actual joint at the base of the joint
Comment
-
Mastercraft Cue Joint
Jonny Think my mini-butt has the same joint as yours (see photo) so don't know why the other joint is different. It might be something to do with getting the balance of the cue right as the butt joint is heavier than the other one.Attached Files
Comment
-
Originally Posted by Bigmeek View PostJonny Think my mini-butt has the same joint as yours (see photo) so don't know why the other joint is different. It might be something to do with getting the balance of the cue right as the butt joint is heavier than the other one.
Give dave a call as you said
Comment
-
Originally Posted by Jonny View PostYea that's the one i've got on my minibutt, extension and butt, screw the mini butt into the shaft and see if it's more secure than your main butt joint, just to see if it's a psychological thing just in case
Give dave a call as you said
Just in case its a psychological thing (definate possibility!) I'll get my mate to play a frame with my cue and see what he thinks. Means he'll beat me as I will have to use his old car boot Riley!!!
Comment
-
Originally Posted by Bigmeek View PostThe mini-butt won't fit the shaft as they're both "male" connections. Won't fit the TOP of the butt either as they're two different types of joints. Confused? Just to clarify. The END butt joint is a nice robust joint like yours but the CENTRE joint is (IMO) a crappy cheap one. (Apologies to Mastercraft!).
Just in case its a psychological thing (definate possibility!) I'll get my mate to play a frame with my cue and see what he thinks. Means he'll beat me as I will have to use his old car boot Riley!!!
I don't understand what you mean by won't fit into the top of the butt?
Do you mean that the male joint on the shaft doesn't fit into the top of the butt?
Comment
-
Definately getting confusing but here goes!!
Originally Posted by Jonny View PostMaybe they do different joins for different kind of cues? because i've got a 3/4 cue with the minibutt-esque female joint in the shaft.
Dave told me they have 3 types of joints.
I don't understand what you mean by won't fit into the top of the butt?
This was in reply to your suggestion that I should "screw the mini-butt into the shaft". Mini butt won't fit as its a different type.
Do you mean that the male joint on the shaft doesn't fit into the top of the butt?
Comment
-
Bigmeek, I have airlock joints on everything. I can attach telescopic and minibutt into the shaft or butt depending on what I need to do.. they're very solid joints so if you're going to change, I recommend them. They also make a cool 'phut' sound when you unscrew them
Comment
-
Originally Posted by lawrywild View PostBigmeek, I have airlock joints on everything. I can attach telescopic and minibutt into the shaft or butt depending on what I need to do.. they're very solid joints so if you're going to change, I recommend them. They also make a cool 'phut' sound when you unscrew them
Comment
-
Originally Posted by lawrywild View PostBigmeek, I have airlock joints on everything. I can attach telescopic and minibutt into the shaft or butt depending on what I need to do.. they're very solid joints so if you're going to change, I recommend them. They also make a cool 'phut' sound when you unscrew themsigpic A Truly Beakerific Long Pot Sir!
Comment
-
Originally Posted by lawrywild View PostBigmeek, I have airlock joints on everything. I can attach telescopic and minibutt into the shaft or butt depending on what I need to do.. they're very solid joints so if you're going to change, I recommend them. They also make a cool 'phut' sound when you unscrew them
Comment
Comment