Bent Cue

[..KiD DyNaMiTe..]

so if he can do it then theree musst be others locall to me that can......that josie guy wasnt there so i will try 2moro

If you ring up the club again and ask for his mobile number I'm sure they'll give it to you or if they don't I'll get it for you. Because he coaches people down there and he's got his mobile up on all the table light shades.

[cravenbiker]

ok kid i`ll let you know 2moro

cheers

[ADR147]

yes it is possible - you need to be able to heat the shaft - normally with steam, if its not something you understand any cue maker will do it for you. if you let me know where you live i will see what i can do.

actually how straight a cue is is not as important as you think as long as it plays the full range of shots and reacts the same way each time.

[Watford]

Any number of people could sort a bent cue out!
John Parris and Robert Osborne are the two I know of in London.
They both have websites!

[ADR147]

Any number of people could sort a bent cue out!
John Parris and Robert Osborne are the two I know of in London.
They both have websites!

Parris and Osbourne, yep i like it, why not start with the cheapest!!!

[Watford]

OK I know!
I said those two because he's in London and didn't want to send it to Tony "Hines" (do they not mean Ions)!
Actually my Dads got two bent cues one player fine but the other ones a bit dodgy so I was goning to take it to Craftsman or Kev Muncaster to get it sorted out!

[wayner147]

I had a really bad bend in a cheap cue i got off ebay and today i was board and wanted to see if i could fix it as i didnt care about the 70$ a paid for it so i heated it with steam and eat over the stove, just like i would with a hockey stick blade, and i got it almost perfect again, it took about ten mins or so and now its not 100% but its almost there.

Im going to get some oil for the cue now to treat it.

Also i made a video of it i will post on youtube later on.

[wayner147]

Im in the proccess of uploading my home made cue stratening method, I don’t recommend doing this to a good cue, but as you can see, i did not get the cue perfect but i made it useable...it went from a big big bend to just a small warp that shouldn’t effect one shot. I also am still trying to get it a bit better i striped the finish and had used raw linseed oil and will all it to dry well and repeat.

you can check it out on my youtube page.

http://www.youtube.com/wayner147

[cazmac1]

Im in the proccess of uploading my home made cue stratening method, I don’t recommend doing this to a good cue, but as you can see, i did not get the cue perfect but i made it useable...it went from a big big bend to just a small warp that shouldn’t effect one shot. I also am still trying to get it a bit better i striped the finish and had used raw linseed oil and will all it to dry well and repeat.

you can check it out on my youtube page.

http://www.youtube.com/wayner147

Your link takes you to you doing the line up

[wayner147]

there is alot of videos on that page and i havent finished uploading the video it will be on here soon its about 50%