Mike Wooldridge - *NEW* 'BlackSpin' Ferrule System

[gazza147]

Mike just a Quick Question m8 how much do you Charge for These Ferrules sent thru post and how much to Fit them if fitting needed?

Also where Brass ferrules you can Buff up/Clean Them abit what happens if your Mark/Scratch the Black on these New Ferrules? Is the Black all the way thru or just on outer coat?


Cheers Gaz.

[MikeWooldridge]

Mike just a Quick Question m8 how much do you Charge for These Ferrules sent thru post and how much to Fit them if fitting needed?

Also where Brass ferrules you can Buff up/Clean Them abit what happens if your Mark/Scratch the Black on these New Ferrules? Is the Black all the way thru or just on outer coat?


Cheers Gaz.

lol gazza, you should know by now i do not discuss prices on here. :snooker:

i'm sure i've already answered these questions earlier in thread but here goes:

i have not decided prices but they will be in shop when it re-opens.

brass discolours/damages easily and is hard to maintain whereas this stays black is easy to maintain, and will stay looking good. but as i've said before, like brass, should be treated with similar care. you can ruin anything if you try or simply do not bother bing careful.

black right through.

'BlackSpin' will not be sold individually or made available for individuals to fit. it is not like fitting normal ferrules and must be done absolutely correctly.

[gazza147]

Sorry Mike didnt realise it is such a secret for Price of this new Ferrule...lol Can you message me a rough price Fitted then.



Cheers Gaz.

[MikeWooldridge]

Sorry Mike didnt realise it is such a secret for Price of this new Ferrule...lol Can you message me a rough price Fitted then.



Cheers Gaz.

jeez!! it is not a secret, i have not decided.

besides which, i have never discussed prices for anything i do here, and never will.

i thought all the regulars on here were aware of that...

prices will be in shop when i'm ready mate.

[andy carson]

mike, if its as good as you say it is, surely you should provide some free samples on a cue and send them out to some of us to test them for you to give feedback

[MikeWooldridge]

mike, if its as good as you say it is, surely you should provide some free samples on a cue and send them out to some of us to test them for you to give feedback

sorry, i lost interest in your post when i hit the word free...

but on a serious note, i am considering a quick turnover of unfinished stock in the workshop, possibly offer them as a one-off to members here at a greatly reduced price in order to get the message out there quicker and allow more people to see and 'feel' for themselves.

also, an opportunity to clear out some of the ash that i wouldn't normally use, but still make for superb playing cues. got quite a lot that builds up over time...

if anyone is interested, email me.

[johno]

Sounds good Mike, i've emailed you.

thanks

[jrc750]

I have also emailed you too Mike, nothing too fancy, so should be a breeze for you
Can you say on here if the cues will still carry your badge (if using the less than perfect ash)

[andy carson]

sorry, i lost interest in your post when i hit the word free...

but on a serious note, i am considering a quick turnover of unfinished stock in the workshop, possibly offer them as a one-off to members here at a greatly reduced price in order to get the message out there quicker and allow more people to see and 'feel' for themselves.

also, an opportunity to clear out some of the ash that i wouldn't normally use, but still make for superb playing cues. got quite a lot that builds up over time...

if anyone is interested, email me.

cheers mike have sent you one of them internet letter thingymebobs

[willtyson]

Email sent mate

[MikeWooldridge]

Can you say on here if the cues will still carry your badge (if using the less than perfect ash)

great question. i may need to think about different badges. parris ones maybe... (only joking of course)

actually, the emotional trauma i put myself through, almost daily, in deciding whether or not to use a shaft is beyond a joke. i really need an outlet for all the shafts so i can stop worrying about this. maybe this will lead to something.

[<CuePower>]

Sounds like an excellent idea...

[willtyson]

Good idea Mike! :snooker:

[ADR147]

great question. i may need to think about different badges. parris ones maybe... (only joking of course)

actually, the emotional trauma i put myself through, almost daily, in deciding whether or not to use a shaft is beyond a joke. i really need an outlet for all the shafts so i can stop worrying about this. maybe this will lead to something.

it's only when you start a focus group to discuss it that you are out of control!

[andy carson]

great question. i may need to think about different badges. parris ones maybe... (only joking of course)

actually, the emotional trauma i put myself through, almost daily, in deciding whether or not to use a shaft is beyond a joke. i really need an outlet for all the shafts so i can stop worrying about this. maybe this will lead to something.

a second line. MW cues instead of carrying your full name on the badge would even look a nice badge, white on black or black on white the M on top of the W with the pinty bits of the letters all touching.