ANDY TRAVIS latest

[Andy Travis]

For those who dont like chevrons, 2 on one side none on the other.
2 ebony + 2 rosewood full splices (hard to see)
Whoever buys this cue has to decide where the flat/badge will line up.
Needs weighting, front splice adding if needed.
58'' long
9.5mm tip
30mm butt
Medium stiff shaft

[DeanH]

one of the cleanest ash shafts i have seen, nice

[JimB]

one of the cleanest ash shafts i have seen, nice

I was thinking the very same thing ... very nice indeed and I like the slight brown colour in the ebony, gives the black some character.

[Ockmonix]

On its way to Germany

The picture doesn't do justice to this beauty of a cue. I love this piece of tulipwood. Thanks so much, Andy!

[Andy Travis]

Glad to hear that, I have more pics as the cue was being made, email me if you want them

[Neil Taperell]

Andy , i am obviously not a cue maker but learn a lot from here and admire all the cue makers . Who i believe turn out great cues in terms of looks and playing ability .
In the picture of the cue you put up that showed different coloured fingers , the fingers were a lot longer than the cues that you have just put up here and sold .
Is this due to you changing the way you make your cues as you explained in a previous thread ,that you construct cues differently to other makers . Is this something that you evolved as your knowledge of cue making improves over time ?
Obviously i don't understand the complexity of the cue making procedure .

[Andy Travis]

They will be around the same length, I don't have a set length to aim for i just plane till I get the square at the bottom of the butt around 12mm it usually ends up with about 7 1/2'' long fingers

[Neil Taperell]

I just like the look of the longer fingers ......I assume this is something that you could ask a cue maker to do ?

[Andy Travis]

Ebony butt with maple veneer + Coolibah front splice.
Stiff ash shaft
57 3/4'' long
9,5mm tip
17.5oz
30mm butt
Balance 17 1/2''
Weight can be added if needed
£235 delivered in UK
If overseas contact me

[involver]

Ebony butt with maple veneer + Coolibah front splice.
Stiff ash shaft
57 3/4'' long
9,5mm tip
17.5oz
30mm butt
Balance 17 1/2''
Weight can be added if needed
£235 delivered in UK
If overseas contact me

i will take it if installment is allowed here. lol.

[Andy Travis]

SOLD... pending payment.
Thanks

[andywong]

For those who dont like chevrons, 2 on one side none on the other.
2 ebony + 2 rosewood full splices (hard to see)
Whoever buys this cue has to decide where the flat/badge will line up.
Needs weighting, front splice adding if needed.
58'' long
9.5mm tip
30mm butt
Medium stiff shaft

Hi Andy, is this cue still available? What is the price? Possible to alter to 57.5" and 9.8mm tips?

[Andy Travis]

Still available, contact me at email address below

[ste bed]

Ordered a new cue from andy at the start of the week he just sent me a picture of a lovely piece of kingwood he's going to use for the front splice.
Hoping andy can post some pics of the cue if not I will put some up when its in my hands.

[crispian jones]

Still available, contact me at email address below

looks a cracker andy, how much are you after ?