If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Use some scales lol, i have digital kitchen one's, altho never been in the kitchen yet
If you can't find any, try asking your local post office to weigh them for you, just tell them your planning on posting it soon and need to find out the weight !
It's been said by some cue makers on here... that a quarter ounce difference wouldn't be that noticable. So don't stress over what to choose chances are you won't be able to tell the difference.
Don't let the fear of losing be greater than the excitement of winning...
How do you know where you need the balance point? This is all stuff I have never looked into in the past. My apologies in advance for asking sooo many questions.
If you're getting a cue made for you I'd leave the balance point up to the cue maker. They know what they're doing. Most cue makers have the balance point at around 16/17 inches. Where the splices are. If you balance your current cue lengthways (horizontally) on your finger you'll get the idea. Some folks prefer a balance point further forward, say 20", but it's all a case of personal preference and what you get used to. More important to get the tip size right for you IMO.
More to it than just picking the weight - I had cues the same weight that felt different - I think the balace point and length can effect how a cue plays and feels weight wise to the player and should be a consideration in this debate.
A cue with a low balance point - more butt heavy can make a cue feel slightly heavier than a forward weighted cue that weighs more - getting the balance point right as well is an important consideration rather than just picking the correct weight.
You're so right Byrom. First cue I ever had made for me was a disaster! I made the big mistake of trying to replicate my 30 year old cue and I mistakingly thought that if I provided the length, tip size and weight everything would be ok. Bloody thing was a disaster! Nice cue but felt like a broomstick! Balance, taper and stiffness of shaft are all important.
Without doubt try before you buy is the best option if there's somewhere local with a good choice of cues.
Last edited by Bigmeek; 6 February 2014, 11:19 AM.
I had two cues a couple of months ago same spec, both weighing 18.4oz the same balance point materials etc the only difference being one was a 3/4 the other a one piece. the one piece felt horrible for me, as it felt far too light over the bridge hand. The shaft density of the 3/4 must have been much greater.
The balance point can make two cues that are exactly the same weight feel like totally different weights when your cuing if say one is balanced at 16" and the other at 20". Having a custom made cue is always a gamble even copying the specs of an old cue even if the weight, taper, balance point, length and tip size are identical, the shaft could be stiffer or more whippy causing the cue to play totally different to the cue you copied the specs from. No 2 cues will ever play the same, keep that in mind before making a decision
Last edited by Dave Walton; 7 February 2014, 02:45 AM.
Comment