Cue wood help

[TexasTrev]

Don't want to hijack Minnesotas thread ,but this is a similar question, I was stretching on the table and as I lumbered off my cue came up and hit the light shade( which are very low so the energy saving bulbs can light the table ) this left a tiny(maybe one or two mill at the most) dint, it looks like it has been tapped by a triangular centre punch. This now catches my stubble on occasions ,what's the best thing to do in this a situation.
It's on the shaft.

Try shaving

[Dave Walton]

Me either and its not just Stu that uses superglue for that kind of repair, few other cue makers who I won't name have mentioned doing it also

yes but again, not on the shaft. don't use super gue fort filling in on the shaft, what it don't make sense for you?

'Super gue fort filling' 'what it don't make sense for you'
Its clear who does not make sense here. I understand exactly what you're saying, however for the size of the repair mentioned, I disagree that it would affect how the cue plays

[bradwight]

For lifting dints of any size I've used this technique with great success for a fee years now.
http://m.youtube.com/watch?v=cdtsa4Sazvw#

Basically, sand away the surface finish, wet the dint with a finger tip of water, dab on a tiny finger tip of lighter fluid and set light to it. Burns fast and not hot or long enough to damage cue but enough to turn the water to steam which expands the wood, lifting the dint. Repeat as many times as it takes to get the dint out, go through the sandpaper grades and re-oil.

[j6uk]

'Super gue fort filling' 'what it don't make sense for you'
Its clear who does not make sense here. I understand exactly what you're saying, however for the size of the repair mentioned, I disagree that it would affect how the cue plays

your arguing for the sake of it! go and ask someone else.. do what you want fella idgaf!
if you can't iron it out on the shaft you gotta go to work, and it don't involve super glue.
oh yeah if you can't play anyway then it don't matter right?

[Dave Walton]

'Super gue fort filling' 'what it don't make sense for you'
Its clear who does not make sense here. I understand exactly what you're saying, however for the size of the repair mentioned, I disagree that it would affect how the cue plays

your arguing for the sake of it! go and ask someone else.. do what you want fella idgaf!
if you can't iron it out on the shaft you gotta go to work, and it don't involve super glue.
oh yeah if you can't play anyway then it don't matter right?

Never asked you anything, it was you who replied to my advice to the op. So wind your neck in. Not saying your advice is wrong, I just don't agree with it. Get over it!

[j6uk]

Never asked you anything, it was you who replied to my advice to the op. So wind your neck in. Not saying your advice is wrong, I just don't agree with it. Get over it!

i'm not on it and as cool as you like. you wanna pull me up on a typing error and said 'its clear who does not make sense'! oh yeah, really? what part of my post #12 don't make sense?

[Dave Walton]

Never asked you anything, it was you who replied to my advice to the op. So wind your neck in. Not saying your advice is wrong, I just don't agree with it. Get over it!

i'm not on it and as cool as you like. you wanna pull me up on a typing error and said 'its clear who does not make sense'! oh yeah, really? what part of my post #12 don't make sense?

The fact you're going on like the hole was an inch deep and wide doesn't make sense when you've already been told Its only 1-2mm. imo filling with superglue will not adversely affect the way the cue plays. The op asked for advice and opinions, which a few people have kindly taken the time to give, I gave my opinion of what I would do and I stand by my advice, you disagree with my advice, fair enough, I disagree with your's so best we leave it at that before things get unsociable. Nobody wants to read us arguing

[j6uk]

The fact you're going on like the hole was an inch deep and wide doesn't make sense when you've already been told Its only 1-2mm. imo filling with superglue will not adversely affect the way the cue plays. The op asked for advice and opinions, which a few people have kindly taken the time to give, I gave my opinion of what I would do and I stand by my advice, you disagree with my advice, fair enough, I disagree with your's so best we leave it at that before things get unsociable. Nobody wants to read us arguing

i see how you like get to know other members now,
your a classy fella and player, so alright you super glue up and down your cue and enjoy your 20 and 30s..

[Dave Walton]

The fact you're going on like the hole was an inch deep and wide doesn't make sense when you've already been told Its only 1-2mm. imo filling with superglue will not adversely affect the way the cue plays. The op asked for advice and opinions, which a few people have kindly taken the time to give, I gave my opinion of what I would do and I stand by my advice, you disagree with my advice, fair enough, I disagree with your's so best we leave it at that before things get unsociable. Nobody wants to read us arguing

i see how you like get to know other members now,
your a classy fella and player, so alright you super glue up and down your cue and enjoy your 20 and 30s..

'I see how you like get to know other members now' what are you on about? Wouldn't bother trying to ridicule my breaks, I'm a pool player so couldn't really give a ****! Have a nice day now won't you :-)

[jrc750]

i see how you like get to know other members now,
your a classy fella and player, so alright you super glue up and down your cue and enjoy your 20 and 30s..

How come you have to be right all the time ?

[Ramon]

You should'nt blame this HotShot !!!!!. He has grown physically, but not spiritually!! So what we have here is a man of 44 who behaves like a child of 12. Against this kind of kids you should say: >> you're right and save yourself a lot of trouble.!!!!!!!!!!!!!!!!

[j6uk]

How come you have to be right all the time ?

i thought you would know better! iv already dropped the names. they've shown me its a no no to use super glue for touching up a shaft. and i only know by experience

[j6uk]

'I see how you like get to know other members now' what are you on about? Wouldn't bother trying to ridicule my breaks, I'm a pool player so couldn't really give a ****! Have a nice day now won't you :-)

you've got an apology coming your way!, i miss read your post #22.. i had the kids around me at the time.
if you don't get me fine. we're all learning ay, sorry fella, enjoy your pool dave

[Dave Walton]

'I see how you like get to know other members now' what are you on about? Wouldn't bother trying to ridicule my breaks, I'm a pool player so couldn't really give a ****! Have a nice day now won't you :-)

you've got an apology coming your way!, i miss read your post #22.. i had the kids around me at the time.
if you don't get me fine. we're all learning ay, sorry fella, enjoy your pool dave

No problems :-)

[Ramon]

you've got an apology coming your way!, i miss read your post #22.. i had the kids around me at the time.
if you don't get me fine. we're all learning ay, sorry fella, enjoy your pool dave

+10 to this one !!!!!!!!!!!!!!!!!!!!!!!