Originally Posted by matt926_uk
View Post
Announcement
Collapse
No announcement yet.
Judd Trump's cue
Collapse
X
-
Originally Posted by Snivy View Postyup it looks exactly like it but the black seems to look longer.
"look longer" you mean longer on the photo or on the Cue Builder off the website?
The length of the ebony butt splices can be different depends on what you spec; 1pc, where the 3/4 joint is placed (JP options are 12" and 16"), etc., also these are made by hand so every cue is slightly different.
butt width: JT apparently has a 30mm butt, and I would repeat what others have said that 27/27.5 would be very slim, go for 28.5/29 (you can have wood removed later, more difficult to add :wink
I think you measured the butt at the correct point, i.e. not at the flat but at the widest.
You said that JP said he had some purple veneer, in what context is this purple veneer to do with JT's cue? or just a possible for your order?Up the TSF! :snooker:
Comment
-
Originally Posted by DeanH View Post"black" you mean the ebony butt splices?
"look longer" you mean longer on the photo or on the Cue Builder off the website?
The length of the ebony butt splices can be different depends on what you spec; 1pc, where the 3/4 joint is placed (JP options are 12" and 16"), etc., also these are made by hand so every cue is slightly different.
butt width: JT apparently has a 30mm butt, and I would repeat what others have said that 27/27.5 would be very slim, go for 28.5/29 (you can have wood removed later, more difficult to add :wink
I think you measured the butt at the correct point, i.e. not at the flat but at the widest.
You said that JP said he had some purple veneer, in what context is this purple veneer to do with JT's cue? or just a possible for your order?
Yeah, I think 29/30 would be best according the replies above.
Asked JP quite sometime back.
Comment
-
-
Originally Posted by cueman View PostIt couldn't have been designed on the cue builder because you cannot get a mix of thick and thin veneers! I think JP may be telling a few porkies there.
- 1 like
Comment
-
Originally Posted by matt926_uk View Postcool, have you tried out a cue with 30 butt though? did you like it? becuase there is a big difference between 30 and your current cue which is 27
Comment
-
As DeanH said, he got new cue for the start of 2016/17 season because he wanted a stiffer cue if I remember rightly. Possibly slightly bigger tip too I think?
He was practicing with a Tyrone(possibly others) cue just before making the switch to the Parris.VR Ultimate Limited Edition 1 Piece Ash Cue - 58” | 9mm | 18.9oz | 29.5mm | 18”.
Long & Short Tele Extensions | 6” & 3” Ebony Mini Butts.
Peradon Blue/Black Patchwork Leather 1 Piece Wide Case.
Century Titanium Ferrule | ADR147 Tip | Taom V10 Chalk.
Comment
Comment