bout time too .
Announcement
Collapse
No announcement yet.
cue finishing
Collapse
X
-
Originally Posted by tetricky View PostNo. I'm finishing a pair of (what I consider) nice Butters cues. In fairness they didn't start off anything like badly finished...so it's a re-finsh, more to my taste.
Comment
-
Originally Posted by trevs1 View Post...Do yourself a favour and read some of his posts in the cues section, and make up your own mind. I'm not guiding you one iota. Then do the same for some of my posts, and see what you make of them too. Please, don't make any judgements based on the crap I've written relating to Master.B, that's just me taking the pi55 and being mind numbingly bored....
Comment
-
Originally Posted by Master Blaster View PostWell, you can't go wrong with the Aurora Cues method on their website. No-one can finish more finely than they do. But I don't take their finish to it's ultimate but drop the last few polishes to leave things a bit less glossy.
------------------------------------------------------------------------------------------------------------------------------------------
Comment
-
Originally Posted by Master Blaster View PostWell, you can't go wrong with the Aurora Cues method on their website. No-one can finish more finely than they do. But I don't take their finish to it's ultimate but drop the last few polishes to leave things a bit less glossy.
Comment
-
Originally Posted by tofushop193 View Postis it recommended to wet sand it as stated in the aurora website? i worry that the oil and ebony dust will form a black paste and taint the burr splicing
Comment
-
I normally sand down the butt with a used piece of 2000 or 3000 grit paper. Then wax. I will make a video of this whole process and post a link on weekend. In my experience nothing works as well as this. The wood grain is enhanced. Butt retains the gloss for a long time. A simple buff with a soft cloth and it back to glossy after useLast edited by sanman; 10 June 2015, 06:19 PM.
Comment
-
Originally Posted by tetricky View PostI'm not doubting your credentials (if you are who I think that you are), nor that you know more than me about every aspect of the game. Evil may prosper when good men do nothing. There is no requirement that anyone be polite, helpful, or supportive. It's in my nature to be open and opinionated. I accept that I don't know everything, and that I might talk rubbish. I live my life in the hope that I may help people where I can, and be helped where I need it and others are happy to. It's how we learn. That doesn't seem to be the way here, whether that's a result of an unfortunate brief moment in time, or being weighed down by past experience. It's okay. I don't expect anyone to change the world. I hoped to be set right, and contribute where I could....but really, I should just practice as much as possible.
My credentials have nothing to do with my annoyance at this cretin making constant jibing posts to various folks on here, spouting persistent crap that does nothing but taunt people and cause conflict. If you can just take a look at some of the posts made, the tone and nature of them, and still feel that it's helpful to a place like this, then fine. However, my view is that it reduces the opportunity for people to have open and useful debate, where opinions and experiences are shared, learnt from and enjoyed. For reasons such as this (though admittedly there are others), I do not post here that much at all any more.
That's just me, and perhaps the forum is a better place for me not being here, but I''d wager it discourages others too.
Perhaps my own contributions over the last day or so have made you feel the same, but, I'd have a healthy bet that you would have come to exactly the same conclusion without my input, quite quickly too.
You will make up your own mind on it I'm sure.
Comment
-
Originally Posted by sanman View PostI normally sand down the butt with a used piece of 2000 or 3000 grit paper. Then wax. I will make a video of this whole process and post a link on weekend. In my experience nothing works as well as this. The wood grain is enhanced. Butt retains the gloss for a long time. A simple buff with a soft cloth and it back to glossy after use
Comment
-
Oh By the way I use Maguiars wax on ferrules. Best shine job on e ferrule ever and it leaves a wax coating on it that prevents the bras from oxidising quickly thus keeping a much longer shine. I bought a tin of the wax for 5 dollars five years ago and its still half full(i would expect at east a 1000 cue applications to a tin). Best and cheapest cue maintenance investment ever. even after use a simple 5 second buff with a soft cloth and the shine is back to new.
Comment
-
Originally Posted by sanman View PostOh By the way I use Maguiars wax on ferrules. Best shine job on e ferrule ever and it leaves a wax coating on it that prevents the bras from oxidising quickly thus keeping a much longer shine. I bought a tin of the wax for 5 dollars five years ago and its still half full(i would expect at east a 1000 cue applications to a tin). Best and cheapest cue maintenance investment ever. even after use a simple 5 second buff with a soft cloth and the shine is back to new.
Comment
-
Personally prefer an oil finish to a wax one. Wax stops the wood absorbing oil, and if scratched off no longer protects. I prefer the feel of oil I like to feel the texture of the wood. I think I'm getting there, I'm going to stop oiling the shafts but keep going with the butts until I get the finish I want.
Lots of layers, lots of time, but it looks and feels good......and that oil is more than just skin deep.
Comment
Comment