Announcement
Collapse
No announcement yet.
Cue finish
Collapse
X
-
Nice looking butt Les....ooh err!:biggrin:
But seriously loving the finish and really makes the grain and design pop out....gorgeous!!!
Any link to product and info on process please mate?VR Ultimate Limited Edition 1 Piece Ash Cue - 58” | 9mm | 18.9oz | 29.5mm | 18”.
Long & Short Tele Extensions | 6” & 3” Ebony Mini Butts.
Peradon Blue/Black Patchwork Leather 1 Piece Wide Case.
Century Titanium Ferrule | ADR147 Tip | Taom V10 Chalk.
Comment
-
This is the link to it mate!
The process is to sand cue down then apply 1 coat, wait for it to dry then put another coat on! wait till dry then another! again wait for it to dry then knock back with 00000 grade wire wool! keep doing it until about 5 coats is applied. After the 5th coat rub down a final time and buff with 8000 grade micro mesh paper until the desired sheen is obtained. Not to be used on the shaft!!!!
http://www.amazon.co.uk/Birchwood-Ca...ywords=tru+oil
Comment
-
Originally Posted by les147 View PostThis is the link to it mate!
The process is to sand cue down then apply 1 coat, wait for it to dry then put another coat on! wait till dry then another! again wait for it to dry then knock back with 00000 grade wire wool! keep doing it until about 5 coats is applied. After the 5th coat rub down a final time and buff with 8000 grade micro mesh paper until the desired sheen is obtained. Not to be used on the shaft!!!!
http://www.amazon.co.uk/Birchwood-Ca...ywords=tru+oil
Comment
-
Originally Posted by les147 View PostIts just the finish i like and i enjoy doing it!!!!No one is listening until you make a mistake!
Comment
-
-
Originally Posted by Byrom View PostCan I ask why you don't use it on the shaft too?
I imagine the clue is here:
Originally Posted by les147 View Post.... THE FINISH LOOKS WET BUT IS SILKY SMOOTH YET DOES NOT SLIDE AROUND IN THE PALM OF YOUR HAND.
It's why I don't like this type of finish. They seem to slip much less smoothly over the bridge hand.
Comment
Comment