Tweet
Hi, friend has cue with the SD joint is not flush with butt of cue and was wondering if there is anything we can do to remedy it? Or is is a case of sending to a cue doctor?
Cheers.
Cheers.
-
VR Ultimate Limited Edition 1 Piece Ash Cue - 58” | 9mm | 18.9oz | 29.5mm | 18”.
Long & Short Tele Extensions | 6” & 3” Ebony Mini Butts.
Peradon Blue/Black Patchwork Leather 1 Piece Wide Case.
Century Titanium Ferrule | ADR147 Tip | Taom V10 Chalk. -
Is the joint at the 3/4 length or at the very butt end? Check this for the former: http://www.thesnookerforum.co.uk/boa...ighlight=flushOriginally Posted by TooDark View Post -
It’s sd joint in base of butt for extensions not 3/4 joint as it’s a 1 piece.VR Ultimate Limited Edition 1 Piece Ash Cue - 58” | 9mm | 18.9oz | 29.5mm | 18”.
Long & Short Tele Extensions | 6” & 3” Ebony Mini Butts.
Peradon Blue/Black Patchwork Leather 1 Piece Wide Case.
Century Titanium Ferrule | ADR147 Tip | Taom V10 Chalk.Comment
-
Has the joint moved inside? I suggest taking it to a cue doctor.Originally Posted by TooDark View PostComment
-
Nope, it seems solid so must of been like it from new. I noticed it and now it’s bugging him lol��Originally Posted by fkhan View PostVR Ultimate Limited Edition 1 Piece Ash Cue - 58” | 9mm | 18.9oz | 29.5mm | 18”.
Long & Short Tele Extensions | 6” & 3” Ebony Mini Butts.
Peradon Blue/Black Patchwork Leather 1 Piece Wide Case.
Century Titanium Ferrule | ADR147 Tip | Taom V10 Chalk.Comment
-
Any advice from any cue doctors or anyone who dabbles with the cue making arts?VR Ultimate Limited Edition 1 Piece Ash Cue - 58” | 9mm | 18.9oz | 29.5mm | 18”.
Long & Short Tele Extensions | 6” & 3” Ebony Mini Butts.
Peradon Blue/Black Patchwork Leather 1 Piece Wide Case.
Century Titanium Ferrule | ADR147 Tip | Taom V10 Chalk.Comment
-
There are two things you can do file it down...Originally Posted by TooDark View Post
Remove it, drill a deeper hole and glue it back in our send it to a cue doc to sort it.
Straight forward job.For that one you've always wanted...
https://www.facebook.com/ninjacues/Comment
-
Cheers Ninja, would using a separate screw in joint screwed into base and then heated up do anything??VR Ultimate Limited Edition 1 Piece Ash Cue - 58” | 9mm | 18.9oz | 29.5mm | 18”.
Long & Short Tele Extensions | 6” & 3” Ebony Mini Butts.
Peradon Blue/Black Patchwork Leather 1 Piece Wide Case.
Century Titanium Ferrule | ADR147 Tip | Taom V10 Chalk.Comment
-
That's the way I would get I out, just don't need to get it red hot.Originally Posted by TooDark View PostFor that one you've always wanted...
https://www.facebook.com/ninjacues/Comment
-
What about knocking back in or will glue be no good?VR Ultimate Limited Edition 1 Piece Ash Cue - 58” | 9mm | 18.9oz | 29.5mm | 18”.
Long & Short Tele Extensions | 6” & 3” Ebony Mini Butts.
Peradon Blue/Black Patchwork Leather 1 Piece Wide Case.
Century Titanium Ferrule | ADR147 Tip | Taom V10 Chalk.Comment
-
Couple of problems with trying that is brass is soft and if not very careful you can bend it.Originally Posted by TooDark View Post
Also I you don't bend it but do move it, it will be loose as they are glued on and that will break the glue bond.For that one you've always wanted...
https://www.facebook.com/ninjacues/Comment
-
Thought as much. Cheers Ninja for taking the time to replay as appreciated pal:encouragement:VR Ultimate Limited Edition 1 Piece Ash Cue - 58” | 9mm | 18.9oz | 29.5mm | 18”.
Long & Short Tele Extensions | 6” & 3” Ebony Mini Butts.
Peradon Blue/Black Patchwork Leather 1 Piece Wide Case.
Century Titanium Ferrule | ADR147 Tip | Taom V10 Chalk.Comment
-
Not a problemOriginally Posted by TooDark View PostFor that one you've always wanted...
https://www.facebook.com/ninjacues/Comment
Comment