**Post Pictures of your cue!**

[jykl2119]

10mm out on the face splice of an ultimate is a lot imo.

[ongkia]

Depends on why its been respliced? could be a few reasons, mainly lengthening the cue, add some weight, make the butt diameter wider etc. I doubt its because the quality of the work was poor in the first place. Afterall, if you are unhappy with the cue you send it back and have another one made, that is the guarantee with JP cues.

Hi fellow members, it appears that I'm not the only one who pays a lot of attention to detail and yes, fastidious is the word! I had both the cues re-spliced cos I had wanted the cues lengthen plus some minor changes like weight n size for ferrule. Paid quite a bit for this work too, especially on the 'Ultimate' cos it had two new layers of 4 secondary splices added on(Quilted Maple n Thuya Burr).

I received both cues yesterday morning by courier and when I opened up the package, my elation turned to disappointment immediately upon inspecting these cues!! The splices on the 'Superior' were not aligned to the original splices at the top and the lower point on the face splice of the 'Ultimate' was out by 10mm!! Unfortunately, these flaws are quite obvious to the eyes, as evident by the various comments here on the forum.

Will shoot off an email to John today about these flaws and gonna call him up directly on Wednesday cos the shop is closed on Tuesday. I would imagine that someone in the JP's shop would have inspected these cues before they were dispatched and would have picked up these flaws immediately, no?

Not sure what JP's response will be, hopefully it'll be a positive one. Any suggestions here?

[narl]

I pretty sure i seen that ultimate on the bay a few days back, listing only seemed to be floating around for about an hour.

[DeanH]

cueman, a spot on post
sorry I was being a tad facetious with my comment.
and yes I think the points of the front splice seem not to line up with the others
hopefully it is the photo-angle, etc.

[cueman]

The first post did say that both JPs had recently been re-spliced by JP. How often does an Ultimate need re-splicing? :shrug:

Depends on why its been respliced? could be a few reasons, mainly lengthening the cue, add some weight, make the butt diameter wider etc. I doubt its because the quality of the work was poor in the first place. Afterall, if you are unhappy with the cue you send it back and have another one made, that is the guarantee with JP cues.

[DeanH]

The first post did say that both JPs had recently been re-spliced by JP. How often does an Ultimate need re-splicing? :shrug:

[cueman]

Was going to say similar. Doesn't look much out, maybe a couple of mm at best but that can happen with any cue maker, especially under time constraints.

[narl]

LP king cue range is about Parris Ultimate price range. Is it my imagination or is the splicing on the Ultimate cue off by a lot. If i received ano ultimate cue and splcing was that much off i would ask my money back.

Doesn't look out to me, could be the angle of the pic making it look off.

[sanman]

LP king cue range is about Parris Ultimate price range. Is it my imagination or is the splicing on the Ultimate cue off by a lot. If i received ano ultimate cue and splcing was that much off i would ask my money back.

[SouthPaw]

I believe LP cues, especially the King cue here, are high end price-wise and reviews have been very good in the past.

If i'm not mistaken the king is around £700...

[DeanH]

I believe LP cues, especially the King cue here, are high end price-wise and reviews have been very good in the past.

[Jake O'Sullivan]

**Post Pictures of your cue!**

What LP cue is that? Are they any good cos they are cheap cues.

J

[ongkia]

My new additions: 1 x LP 'King' Series Cue, 1 x John Parris 'Superior' Cue and 1 x John Parris 'Ultimate' Cue. Both the JP cues were recently re-spliced and re-finished at JP's workshop in London. All the cues play like a gem.


Own Cues3.jpgOwn Cues1.jpgOwn Cues2.jpg

[jim evans]

loverly cues jim, are you gonna get that badge re done or leave as it is?

prob get it done but dont want to realy have it stamped again just re -inked

[jim evans]

A few quid's worth there Jim

about 4 1/2 grand at cost jr