thanks very much, I have tried to make a quality product and that extends to the packaging. I do hope that ity will exceed peoples expectations.
Announcement
Collapse
No announcement yet.
Waxing my cue
Collapse
X
-
I used to use wire wool 0000 grade, but i i have found over the many years that it will only give a satin finish, and as such the wax or oil finish that will be applied after, will then not be the highest quality finish. I have now found a new method, that will produce the bare wood to a high polish, before even applying the wax or oil finish.
Comment
-
Here are the pics of my cue after applied linseed oil i would say the cue has had 4 coats of oil surely the shaft should at least get a hint of colour by using the oil but i cant tell the difference between now and when i first started oiling the cue surely i must be doing something wrong can anyone help.
Comment
-
As a rule linseed oil shouldn't make the wood much darker mate.
You aren't doing anything wrong.
Just make sure you buff it up to get the excess oil off.
Danny
P.S. make sure you are using raw linseed oil and not boiled.Last edited by danam1; 18 April 2011, 06:36 AM.Did you put my "1" up ?
Comment
-
with linseed oil, in my experience, it is only time (light) and use, and the re-application of the oil that will darken the ash.
You can apply a stain to the cue, my friend has a Dave Coutts that has been stained nearly black (ebony stain I guess). this I guess would have to be done before the application of the oil, as the oil will provide a barrier to the stain, sopping the stain absorbing into the shaft.
Comment
Comment