Ray from Florida

[Ray4805]

I am trying to get my table back up to speed, Brought to Florida some 35 years ago, got it messed up by a Pool table tech. Now I have ordered the New cloth and cushions from the UK, but bneed to know how I resize the pockets. By Balls are 2 inch, there must be a coralation between Ball and Pocket size, but cannot find it anywhere, Any help would be nice
Ray

[DeanH]

Welcome Ray

I have moved you thread to Tables to catch the attention of anyone there

What size is your table - 12", 10"?

Pictures are always welcome here on TSF and they tell a thousand words
Instructions to add images are below.


How to add images to your TSF posts
You can use a free image-sharing site such as ImgBB, without registering (you can register for free), to upload your images, you may have to do the “not a robot” checks quickly. There are other image sharing sites as well.
ImgBB.com
Click on "Start Uploading".
Browse to the file and select it, click Open.
Auto delete image - leave as "Don't autodelete".
Click "Upload".

Change "Embed Codes" to "BBCode full linked".

Hover mouse over the code in the box, a "COPY" will appear, click this.
Go to your TSF post and paste.
You can repeat for multiple images in a single post.

[itsnoteasy]

If you take 83mm at the fall as pro cut pockets with 2 1/16balls, to keep the same pocket opening to ball ratio with 2inch balls they should be 80.5mm at the fall.

[Ray4805]

Welcome Ray

My Table is 8ft

I have moved you thread to Tables to catch the attention of anyone there

What size is your table - 12", 10"?

Pictures are always welcome here on TSF and they tell a thousand words
Instructions to add images are below.


How to add images to your TSF posts
You can use a free image-sharing site such as ImgBB, without registering (you can register for free), to upload your images, you may have to do the “not a robot” checks quickly. There are other image sharing sites as well.
ImgBB.com
Click on "Start Uploading".
Browse to the file and select it, click Open.
Auto delete image - leave as "Don't autodelete".
Click "Upload".

Change "Embed Codes" to "BBCode full linked".

Hover mouse over the code in the box, a "COPY" will appear, click this.
Go to your TSF post and paste.
You can repeat for multiple images in a single post.

My Table is 8ft

[Ray4805]

If you take 83mm at the fall as pro cut pockets with 2 1/16balls, to keep the same pocket opening to ball ratio with 2inch balls they should be 80.5mm at the fall.

Would that be he slate or the opening of the Pocket I like to call the throat

[itsnoteasy]

Would that be he slate or the opening of the Pocket I like to call the throat

The throat, the fall is measured from cushion to cushion just touching the arc of the slate.

[Ray4805]

OK as it sounds with the Ball falling into the Pocket.

[Ray4805]

Thank you for your help. Ray