If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
well, something within the grid of the resin must be dielectric, otherwise there would not have been any heating at all.
I'm not a chemist or physicist, but I would not interpret spinning poles within molecules as impact on the structure. On a smaller scale, also electrons are "moving" around the atom core ...
But now after all theory, I will give it a real world long term test run.
(and don't talk to me about longevity of Aramith billiards balls ... they lose weight faster than you'd expect anyway).
The ATCs actually play worse as temperature increases. When they're "hot" (50°C+), playability (energy transfer, liveliness) gets really bad and the impact sound will make you sick.
They played best when they were back at room temperature (in my case 21°C).
So what will be the effect when they're cooled down? We will find out over the weekend
The ATCs actually play worse as temperature increases. When they're "hot" (50°C+), playability (energy transfer, liveliness) gets really bad and the impact sound will make you sick.
They played best when they were back at room temperature (in my case 21°C).
So what will be the effect when they're cooled down? We will find out over the weekend
Great post, I think Jimmy might get a good read, I made a ball cleaner from a 5 gallon pail and a 10 inch electric car waxer, it works great, if snooker balls left in for too long they get hot from friction. Cheers
I try hard, play hard and dont always succeed, at first.!!!!:snooker:
Out of the fridge, condensation is the only problem. Within seconds, the surface is soaking wet - and they play as expected.
So, where does that leave us?
I'd conclude: If, for example during winter, you have problems with cold equipment and surface condensation, you CAN use a microwave oven to warm up your Snooker balls. But do so on the lowest power setting, only for a short time, in order to get them to about 20°C. Any hotter is not beneficial.
And if you play in a properly heated environment, don't bother.
What's your take on humid conditions, Redphex, our club gets very warm and sticky in the summer, have you got any experiments lined up for that lol.
Awful conditions, we have the same problem at our local, he leaves the outside door open and it make's the humidity worse, the tables are unplayable atm. they are that bad i'm having a sebbatical
Comment