Announcement

Collapse
No announcement yet.

White ball tight on the cushion

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • White ball tight on the cushion

    When the white ball is tight on the cushion do you always have to raise your cue?
    Dark side of the moon

  • #2
    No, try not to raise the butt of the cue; the cue should be as level as you can get it. As you address the cue ball the under side of the tip should brush the cushion, there should be a visible chalk mark on the cushion where you played from. Another tip is to shorten the back swing as this elements errors.

    Comment


    • #3
      Yup couldnt agree more with the above mate, another thing is perhaps shorten your grip length on the cue perhaps 3-6" from the bottom of the cue, will help it feel a bit more comfortable
      Back at snooker after many years away.

      Highest Match Break 53.
      Highest Practise Break 78.

      Comment


      • #4
        Echo wat the above has said. Grip the cue farther up the butt than you would normally and remember the theory is the same as when you are using the rest, keep it as simple as possible. Try not to do anything that would require you to cue down on the white as this would amplify the effects of any unwanted side you put on the ball.
        sigpic A Truly Beakerific Long Pot Sir!

        Comment


        • #5
          It seems to be when I play straight it just screws up but if I high-butt the cue I hardly ever pot but at least manages to hit the ball, when do you know if its time for a new tip because mine hardly allows me to put any chalk on it!
          Dark side of the moon

          Comment


          • #6
            Rough it up with a tiny piece of sandpaper. Its generally time to change the tip when its worn down too far towards the ferrule which could damage the cue and white ball.
            sigpic A Truly Beakerific Long Pot Sir!

            Comment


            • #7
              Originally Posted by RGCirencester View Post
              Rough it up with a tiny piece of sandpaper. Its generally time to change the tip when its worn down too far towards the ferrule which could damage the cue and white ball.
              Okay well, wont use cue until its sorted
              Dark side of the moon

              Comment


              • #8
                Your fine unless only a tiny part of the tip is left.
                Mike laminated tips have a black ring to tell you when its time to change the tip, but I think Mark Williams in particular was using a very very worn down tip during the masters.
                http://www.handmadecues.com/extras/23-laminatedtips.htm
                sigpic A Truly Beakerific Long Pot Sir!

                Comment


                • #9
                  Originally Posted by RGCirencester View Post
                  Your fine unless only a tiny part of the tip is left.
                  Mike laminated tips have a black ring to tell you when its time to change the tip, but I think Mark Williams in particular was using a very very worn down tip during the masters.
                  http://www.handmadecues.com/extras/23-laminatedtips.htm
                  Alright cheers pal
                  Dark side of the moon

                  Comment

                  Working...
                  X