**Post Pictures of your cue!**

[RogiBear]

Yes I have used the raw linseed oil too but I always found it greasy even after I polished it. I bought some Morhers Pure Brazilian Carnauba Wax which in simple terms is a very high end car wax. I am talking just for the butt. I will let you know how I make out.

you could always buy the butt wax that JP sells

https://www.parriscues.com/products/...is_cue_polish/

[RogiBear]

that's the one
never got round to getting some.

I have some, but to be honest i don't like the finish it produces if you go by their instructions. Too glossy and sticky imo.

If you buff it while it is isn't quite dried it produces a satin finish which isn't bad

[jrc750]

I think the butt looks just fine Les, nice cue

[lesedwards]

I use good old raw linseed oil and it buffs up quite nicely.
Someone once mentioned some gun-stock stuff which is longer lasting than linseed oil, but I can't find it on ebay at the mo.

Yes I have used the raw linseed oil too but I always found it greasy even after I polished it. I bought some Morhers Pure Brazilian Carnauba Wax which in simple terms is a very high end car wax. I am talking just for the butt. I will let you know how I make out.

[DeanH]

tru-oil dean?

that's the one
never got round to getting some.

[RogiBear]

I use good old raw linseed oil and it buffs up quite nicely.
Someone once mentioned some gun-stock stuff which is longer lasting than linseed oil, but I can't find it on ebay at the mo.

tru-oil dean?

[DeanH]

I use good old raw linseed oil and it buffs up quite nicely.
Someone once mentioned some gun-stock stuff which is longer lasting than linseed oil, but I can't find it on ebay at the mo.

[lesedwards]

Nice cue les, well done mate got a good deal there.

Any idea what I can use to bring the shine back on the butt. Too dull for my liking?

[justf]

Nice cue les, well done mate got a good deal there.

[lesedwards]

here is what an Exclusive should look like (i.e. the splices, etc.), from Parris website the description
"Ash Shaft
Ebony hand spliced butt 22” (56cm) long with joint at 16” (41cm)
Four secondary splices in Rosewood with single Ebony face all with green veneers"

but someone who uses a computer and does not know how to attach photos to an email? dodgy?

Hi guys below is some pics of my purchase. John Parris Exclusive 3/4
57"
9.5 mm
18 oz
One question does anyone have any ideas on how to make the butt shine I find it very dull.

[lesedwards]

Well that seems to equate to £250, i would buy them all day long at that price !!
£487 brand new, sell on ebay around £400 i reckon

SOLD I am now the proud owner of a John Parris Exclusive, picked it up last night I will post photos later today. No extensions but I found the extensions for my cheaply Woods cue fit and also my Yiang Yang but both extensions are the short style 27" anyone know where I can get a mini extension and normal extension or should I just order them from Parris website? Also the butt is very dull, what does everyone use to make it shine?

[garysnooker]

my playing cue had this from new must be about 24 years cost me 170 at the time

[DeanH]

Does anyone own a John Parris Exclusive that they can post a few photos of, especially the badge. This guy selling his cue says he does not no how to email me some photos. I need some photos of one to compare. He says it is a year old.

hi Les have you seen/bought the Exclusive?

[Wayne G]

Nice ash shaft.

[SouthPaw]

**Post Pictures of your cue!**

That is my favourite style of butt! Four secondary splices straight to the ebony is very classy. Let us know how it plays once you get it cueman...